BEST QD SCOPE MOUNT (QUICK RELEASE) REVIEW 2018
Our Story
As the years go by, the QD scope mount has become very famous. QD stands for Quick Detach which is commonly used on top of a AR-15 so that you can attach your AR-15 scope. That being said, it is a device that is fixed onto a rail with throw levers instead of screws which allows you to mount and dismount your optic device without using any tools to remove and place it. This mount is something that is common these days because it is so easy to use and it helps you attach your optic device onto your firearm in a fast motion and you do not have to waste your time to mount and dismount your optics device.
This QD mount is extremely suitable for those who have a collection of optic devices such as scope. Furthermore, if you do not like having or if you feel uncomfortable having this product, you can simply remove it easily. And the best part is, it doesn’t take up much of your time. There are a few factors that you should really look into before making your purchase.
Top QD Mount Scope (Quick Release) Comparison Table.
Show 102550100 entries
Search:
Product NameDurabilityRing SizePrice
Flat Top Offset One Piece QD scopeHigh30mm$$
Picatinny Flashlight Mount ModkinHigh30mm$
Mizugiwa 1 Inch Quick Release Scope MountHigh25.4mm(1 Inch)$
Burris 410344 AR-PEPR MountHigh25.4mm(1 Inch)$$
Ulako 5 Slot QD LP Picatinny Riser MountHighNo Value$
CSINO QD Quick Release Scope Laser MountHigh30mm$
Leupold 110290 Mark 2 IMSHigh30mm$$
Showing 1 to 7 of 7 entries
PreviousNext
1) Durability
It is extremely important for you to make sure that your QD scope mount has a high durability. This is to ensure it remains in a good condition when it is mounted onto your firearm that is being used in a rough situation. Therefore, you should make sure that it is made of a really strong material such as a type of metal or a type of alloy because they are really strong. Moreover, ensure that it is fully waterproof so that it could be used during a rainy day.
2) Weight
Another extremely important factor is the weight. The mount should be light because your firearm is already heavy and when you add the scope, it will become heavier. Therefore, it should be light so that you will not have a problem to carry it around with you. Moreover, if it is too heavy, you might have difficulty in aiming at your target which could cause you to have an inaccurate aim.
3) Ring Size
The ring size should be big. This is extremely important because most scopes these days are big so you need a big ring size in order to have a secure mounting. If your QD optic has a small ring size, it will be hard for you to find a good quality scope that could fit your QD optic ring size. Therefore, make sure the ring size is suitable to ensure maximum accuracy.
4) Way to Install
Your desired mount should be easy to install. If it is really hard to install it, most people might not like it and they might move on and find another product which is easy to install. Another reason why it should be easy to install is because if it is easy to install, you won’t spend much time installing it and you could get do other things after quickly installing it.
Flat Top Offset QD Scope Mount with Quick Release
This QD scope mount is made of aircraft grade aluminium which is a really strong alloy. This proves that it is a really durable so when you use it in a really harsh situation, it will still remain fine and will not be damaged that easily. Therefore, it is really important for you to choose a solid mount that has a high durability so you do not have to worry about it getting damaged during a really harsh situation.
This product can be installed extremely easily and fast. Therefore, you would not be wasting your time installing it onto your firearm. In fact, it will only take you a few minutes maybe to install it and then you are done which means you can carry on doing your other daily chores or routine.
The Quick Detach (QD) cam locks can be easily adjusted by using only your fingers. This is extremely helpful because you do not have to depend on any tools to help you adjust the cam locks which means you can adjust the QD cam locks whenever you want and wherever you want because all you have to do is pull up and rotate the star wheel on the opposite end of the clamping bolt which is extremely easy. It would take you a few minutes to complete this task.
The best part is that it can fit on any flat top picatinny rail system. This is perfect because most firearm these days have either a Picatinny rail or Weaver rail so it would not be that hard to have a firearm that has a Picatinny rail. However, it can’t fit onto a Weaver rail system because weaver accessories will be able to fit on any Picatinny rails however Picatinny accessories can never fit onto the weaver rails. Therefore, if you have firearms with a Picatinny rail system, it would be perfect for you.
Besides that, it has a 30mm ring size which means you can fit any scope which has a 30mm body diameter. Most scopes these days have 30mm body diameter so it would not be a problem to ensure a secure fit.
Another amazing thing is that it is very stable. When an optic device such as a scope is mounted onto the QD mount, the scope will remain in a very stable condition. This is really amazing because if it is stable, you will be able to aim well at your target which will allow you to have an accurate aim at your target. Therefore, you will never miss your shot! It is extremely important for you to ensure that the mounting of your scope onto the firearm is stable.
All in all, this product has tons of good features and the best part is, the price is really affordable. By choosing this, you will be able to get a high quality product at an amazing price, so don’t miss this opportunity.
Picatinny Flashlight Mount Modkin
Firstly, this product is made of aircraft grade aluminium which is a type of alloy, commonly used to make scopes and also mounts. Aluminium is a type of alloy which is really strong so without a doubt that this product has high durability. You don’t have to worry about it when you are using it in a harsh situation as it will not get damaged that easily due to it’s high durability feature.
Another amazing thing is that it is really light. It is really important that you ensure it is lightweight because your firearm and your optic device would already be heavy. If you get a accessory that is heavy, you will have to carry a really heavy load which might make it uncomfortable for you to carry and you could get tired easily but don’t worry! This product is light weight and when it is mounted onto your firearm, you would not even be able to realise it’s there!
It has a ring diameter of 30mm, which means you can fit any scope that has a 30mm body diameter. Moreover, it can also fit flashlights and other tactical lights as long as they have the diameter of 30mm. You can even add a back up ring which will make the diameter of the ring become 25mm incase you have any optic devices or tactical lights with the diameter of 25mm. All you have to do is us a hex wrench, which will be provided, to put in the back up ring. It won’t take you that long to put it in.
This mount can be easily attached and detached and it is also equipped with a QD cam lock. To attach this QD model, it won’t take you that long. You can do it within seconds. This is really helpful because you don’t have to waste too much of your time to attach it onto your firearm. The faster you finish, the faster you can get started on your other activities. Since it doesn’t take long, you can attach and detach it whenever and wherever you want to which is really convenient.
Well, the price is really affordable and it has all the amazing features so in my opinion, this is a really good buy. This product can be used on flashlights, tactical lights and also optic devices such as scopes as long as they have a body diameter of 25mm or 30mm.
Mizugiwa High Profile Picatinny QD Mount
This shooting accessory is manufactured by Mizugiwa. Do you know that most QD scope mounts are made of aluminium? Well, it is also made of aluminium, which is a really strong alloy. An alloy is basically a mixture of a metal and other impurities to produce a material which really good features such as strength. Since it is made of an alloy, the durability is high which means it can withstand any impact pressure caused when it is being used in a harsh situation so basically, you don’t have to worry about it’s condition as it can not be damaged easily.
Another thing about this scope mount is that it has a ring size of 25.4mm, which is fine. There are products that has a body diameter of 25.4mm so this is not a problem for you. However, it doesn’t not have a back up ring which means it can’t fit a scope that has a body diameter smaller or bigger than 25.4mm. Therefore, if you have a lot of scopes that have a bigger body diameter, then you should look for a product with a bigger ring size. Make sure you do not buy the wrong one!
Besides that, it has a lock lever which is fully adjustable so that it can fit on any Picatinny. As I mentioned earlier, a Picatinny accessory can never fit on a Weaver rail system so if you own a firearm where most of them has a Weaver rail system, then this accessory is not the right one for you! This is an extremely important factor which many people tend to not realise so make sure you purchase the correct QD mount for your firearms.
Moreover, this product can be easily attached onto your firearm and it can also be detached easily. It does not even take that long to attach and detach it. That being said, mounts basically refer to a device that can allow you to attach or detach your optic devices easily without any problems. You can even do it within a few minutes! This is really amazing for those who like to constantly change the scopes and sights they use!
In terms of pricing, it is really affordable and it has so many good features. However, it does not have a back up ring. Some people are fine with it but there are some who prefer having a back up ring for their mount so if you don’t mind not having a back up ring, then this is the right product for you!
Burris QD Scope Mount
When this QD scope mount is mounted onto the firearm, it will remain in a really stable position. Therefore, when an optic device is attached onto it, it will remain in a really stable position which makes it easier for you to aim at your targets. You would not have to worry about your scope falling due to any instability. This will ensure that you have an accurate aim at your target and you will not miss your shot!
This product is made of a really strong material which is extremely durable. With it being durable, there is a really low chance of it getting damaged. Therefore, when you use it during a really harsh situation, you don’t have to worry about it getting damaged easily, hence it is safe to say that it can last for a long time.
Another thing is that it has a feature called “Proper Eye Position Ready” (PEPR) which gives you two inches of forward scope positioning which will ensure you receiver a proper eye relief and it will also ensure that you maintain your shooting position. This is a really amazing feature!
This QD scope mount is also really lightweight so when you attach it onto your firearm, I don’t think you will be able to see a difference in weight. This is really good because your firearm would already be heavy, if your mount is heavy too, it will be really hard for you to carry it around and it could cause you to be tired. Therefore, it is really important to get a lightweight accessory.
Apart from that, it gives you the option to choose whether you would want a permanent attachment style or a quick detached option which will allow you to change your optic device often so if you are a person who loves to change your scopes daily, then the quick detached option would be perfect for you!
This shooting accessory has a ring diameter of 25.4mm, which is basically one inch. So if you have a scope with a body diameter of 25.4mm, then it would be perfect for you. However, it does not have a back up ring so it won’t be able to fit a scope that has a body diameter of more or less than 25.4mm so make the right choice.
All in all, it has many good features and it is extremely durable. Although the price is slightly high, this mount is worth the price due to all the good features!
Ulako 5 Slot QD Quick Release Picatinny Riser Mount
Lets start with the fact that this scope mount does not have a ring diameter because it has a a Picatinny rail mount system. Therefore, it only allows scopes that have a Picatinny or Weaver rail because like I mentioned earlier, a Weaver accessory can fit on a Picatinny rail system but a Picatinny accessory can never fit on a weaver rail system. This feature basically will be able to attach scopes that have either a Picatinny or Weaver rail system. This will be extremely easy because most scopes these days have either one of those rail systems.
This product is made of aluminium, which is a really strong alloy. Therefore, without a doubt, it is extremely durable. When you use this scope mount during a harsh situation, there is a very low chance of it getting damage due to is durability.
It is a light weight scope mount. This is really a good characteristic because it is very important for you to get a light scope mount. Your firearm and scope would already be heavy and if you scope mount is also heavy, you are gonna have a really hard time carrying all of that. Therefore, a lighter weight will make it easier for you to carry your firearm and scope. Also, don’t forget to get yourself a blood tracking light so you can hunt easily under low light conditions.
Another amazing thing is that it is very easy to attach and detach. You don’t even need tools to do this because all you need are your fingers and you can already attach it! This is extremely amazing because not only it is easy to install but it also does not consume so much of your time just to install it onto a firearm, which is helpful because you can attach it whenever you want to.
This mount locks safely in place when it is placed onto a firearm and it also has a really quick release lock. Since it can be locked safely at it’s position, when a scope is mounted onto it, you don’t have to worry about it falling off as it is already in a secured and stable position. This can also help you improve your aiming and ensure that you have a much more accurate aim at your target.
This scope is considered really cheap yet it has so many amazing features so this is a really great opportunity for you to own a good quality QD scope mount.
CSINO 1″ QD Quick Release Laser Mount
This QD scope mount is made of an alloy which is aluminium. Aluminium is a really strong alloy which ensures that it has a high durability. As I mentioned earlier, most scope mounts are made by aluminium as it is really strong so when it is being used in a harsh situation, there is a very low chance that the scope mount might get damaged.
This solid mount can also be mounted on either a Picatinny rail system or a Weaver rails system. This should not be a problem as most firearms these days will have either one of those rail systems so getting this it would not be a problem.
Furthermore, it has a diameter of 30mm, which means you can only fit a scope or tactical light with a body diameter of 30mm. However, this specific scope mount has a back up ring so when the back up ring is inserted, the diameter of the ring becomes 25mm. This means you are also able to fit any scope or tactical light that has a body diameter of 25mm. This is a really helpful feature because it provides you the common diameter that most scopes and tactical lights have. To attach the back up ring, all you need is a hex wrench, which will be provided.
Another feature is that it has a quick release lever which will allow you to attach and detach your scope mount easily. You don’t even need tools for this. All you need to do is use your fingers to push the lever and attach your scope mount onto your firearm. It’s that simple and it only will take a few seconds to attach and detach it.
The price is low and affordable yet it has a lot of good features. You can also attach tactical lights onto this product, according to your preference.
Leupold 110290 Mark 2 IMS Mounts
This is another QD scope which is very easy to use. You don’t really need to use tools to attach it onto your firearm and it doesn’t take you that long to attach it. This helps you save time and you get to use your time to do other activities. Since it is very easy to attach it onto a firearm, you can do it whenever and wherever you want to.
This scope mount is made of aircraft grade aluminium, which is extremely strong. Aluminium is an alloy so this basically proves that this scope mount is extremely durable. You don’t have to worry about it when you use it in harsh situations as it doesn’t not easily get damaged. This is extremely helpful because you don’t have to buy another one because it can’t be damaged easily.
Not only that, it can fit onto any Picatinny rail system which is perfect. This is because most firearms these days either have a Weaver rail system or Picatinny rail system. Unlike the Weaver accessory, a Picatinny accessory can not be mounted onto a Weaver rail system. Therefore, if you are looking for a QD scope mount for you firearm that has a Weaver rail system, this would not be a suitable mount for you then.
This shooting accessory is also lightweight. This is a really helpful feature because if you purchase a mount that is heavy, it might be slightly hard for you to carry your things because I’m pretty sure your firearm and scope would already be heavy and if your scope mount is heavy too, then you are going to be having a really rough time. Therefore, make sure you check the weight before purchasing it.
Moreover, when this scope is mounted onto a firearm, it will be in a stable condition. When a scope is attached on the mount, the scope will also remain in a stable position. This is good because it will be able to help you aim better at your target. Your aim will be more accurate and I’m sure you will not miss your shot.
This scope mount has a ring diameter of 30mm which means you are able to attach a scope that has a body diameter of 30mm, which should be easy because most scope these days have body diameters of 30mm. However, it does not have a back up ring which might not satisfy certain people because some people prefer having a back up ring but if you’re fine without the back up ring, then this scope should be fine for you.
This scope mount is slightly pricey but it has many good features although it does not have a back up ring.
Conclusion
QD scope mounts are extremely useful and they’re becoming extremely popular. If you are someone who likes to change their scopes every time they head out to the shooting range, then you should probably get a QD scope mount. It is extremely easy to use and it does not consume much of your time. However, before purchasing your QD scope mount, make sure you go through the important factors that could help you make a choice.